Free shipping to
What you'll receive
  • biometric authentication kit delivered to your doorstep
    biometric authentication Kit

    Your kit, tested and shipped in 24 hours

  • Learn and build your biometric authentication project from anywhere, anytime
    Online Course

    Learn and build your project anywhere, anytime

  • Build biometric authentication project and showcase your practical skills to the world
    Smart Certificate

    Showcase your practical skills to the world

  • Clear your doubts on biometric authentication project through dedicated 1-1 sessions
    1-1 Expert Support

    Clear your doubts in dedicated 1-1 sessions

What you'll build
  • delivery icon
    working biometric project

    Impress your interviewers, teachers and friends

  • Develop technical skills by building biometric authentication project
    Skills

    Not a 'paper engineer'. Be a real, practical engineer

  • Build portfolio by building biometric authentication project
    Portfolio

    Projects portfolio. Not bunch of certificates.

  • Grab the best jobs and higher education opportunities by building biometric authentication project
    A Career

    Grab the best jobs and higher education opportunities

Why build a biometric authentication project?

Biometric devices are gaining popularity everywhere for authentication.
From offices for security to classrooms for attendance, biometric devices are making our lives easy.
You will build one such project in this course where the user can first register his fingerprint and then open door using the same.

biometric authentication Project Thumbnail
What you'll learn in this course

In this project you will build a finger print based Biometric Authentication system using Arduino development board which can allow or deny access. You will practically work with biometric sensors (finger print scanners), storing of biometric patterns, Arduino and LCD display
As part of this course you will learn about:

  1. Biometric readers - working & application
  2. Arduino Architecture and its Programming

youtube video on Biometric
youtube video on Biometric
  • Learn: Introduction to Biometrics
  • Learn: Finger Print Systems and their Functioning
  • Do: Finger Print Module Introduction and Pin Description
  • Review: Biometrics
  • Learn: Arduino: An Introduction
  • Learn: Arduino Architecture - Structure & Features
  • Learn: Arduino Architecture - Pin Diagram
  • Do: Arduino - An Introduction
  • Do: Connect and Detect the Arduino Uno
  • Review: Arduino: An Introduction
  • Learn: Introduction to Arduino IDE
  • Learn: Structure of Arduino Programming
  • Do: First program in Arduino: Blinking LED
  • Do: Basic programing practice
  • Review: Arduino Programming
  • Learn: LCD display
  • Do: Powering LCD display
  • Review: LCD display
  • Do: Adding Finger Print Data Programming Logic
  • Do: Searching Finger Print Data Programming Logic
  • Do: Deleting Finger Print Data Programming Logic
  • Do: Integrating Fucntions
  • Do: Burn the Code
  • Do: Finger Module Connection
  • Do: LCD display Connection
  • Do: Function Switch Connection
  • Do: Testing the Finger Print System
  • Do: Upload Final Project Video
  • Do: Download Certificate
How can you build this biometric authentication project?
1) Enroll

Get access to course instantly. Kit will be shipped within 24 hours.

2) Learn

Access video lectures, tutorials and quizzes to learn the technology in biometric authentication project

3) Build

Use the kit and practical sessions in course to build your biometric authentication project

4) Submit assignment

Complete the course and submit your assignment to get your certificate

Get Started Now

Signup and try our first few chapters free of cost. Pay only when you like it!

Self Paced
Enroll together. Pay less
Team of 5 $54 /student
Team of 4 $62 /student
Team of 3 $75 /student
Team of 2 $101 /student
Team of 1 $180 /student

You can also add friends later

Live Online
Enroll together. Pay less
Team of 5 $81 /student
Team of 4 $93 /student
Team of 3 $112 /student
Team of 2 $152 /student
Team of 1 $269 /student

You can also add friends later

Want in your institute?
Organize a Workshop

Our experts will visit your college/ school/ office with the kits and conduct an awesome hands-on workshop.

Learning will not be more fun than this!

Frequently Asked Questions about biometric authentication project

How to build a biometric authentication project?

Login to our online learning portal will be provided instantly upon enrollment. The portal will have video lectures, tutorials, and quizzes required to build the biometric authentication project. Kits are well tested and shipped to your doorstep in 24 Hours. Use the kit along with the online portal to complete the project at your home itself.
You can enroll for free demo to understand how it works better. Pay only when you are confident and if you like it!


How much time do I have to complete the biometric authentication project?

You need to complete the project within 45 days of enrollment. Generally, the project would take 16-20 hours to complete.


What will be in the biometric authentication project kit that I will receive?

You will get all the components needed to build a biometric authentication project. The following are the list of components that you will get in the kit,

  • Arduino Uno
  • Arduino Uno Programmer Cable
  • FInger Print Scanner R305
  • LCD Display 16*2
  • 1.8k Resistor
  • Course Manual
  • Connecting Wires
  • Bread Board
  • SPST Switch - 2 Nos.
  • Push Button - 3 Nos.
  • Other miscellaneous items

Multimeter and Battery (6F22 9V) are required for this project. Shipping these items isn't possible due to the logistics issues. These items are easily available in your local market. Our team will assist you in getting these items if needed.


Should I enroll in Online Course or Offline Workshop?

To help you select the right mode of learning, here are the features of both:

FeaturesClassroom TrainingOnline project based course
KitWill be given in class & taken back after the trainingWill be dispatched to you in 24 Hours
Doubt Clarification1 trainer to 40-50 studentsPersonal 1-to-1 session (Video/Chat) with our experts
FlexibilityFixed place and timeAnywhere, Anytime - at your convenience
VenueFixed, only when schedulesAnywhere as per your convenience
Additional cost for studentTravel, Accommodation to reach the venueNo additional costs
RefundOnly before training program startsUpto 3 days of receiving the kit
Revision Using study material in pdf formatSee the video lectures/tutorials any number of times
Pause & ResumeNot possiblePause and resume any number of times
Hands-on session1 trainer to 40-50 studentsHigh clarity videos showing clear steps which can be reviewed any number of times
CertificationUpon Completion Upon Completion
ExaminationOnline at extra feeInbuilt in the course

Can my friends build along with me?

Ofcourse, and we strongly encuorage that. The course is fun and learning is more effective when you work together, learn together and build together!

  • A team can have maximum of 5 members.
  • All team members will get separate logins and certificate.
  • One kit will be sent per team.

Why does your kit look rugged?

With Skyfi Labs you get to build projects from scratch “literally”. Building projects using rugged components will give you the confidence of a creator and helps you to realise that products can be “created” rather than “assembled”.

We want you to believe that you don't need factory-made kits to innovate and innovation is something that happens in your brain. We want you to have a mindset of using components available around you for innovation and not look at amazon for kits.


Am I eligible for this course?

If you have written even 5 lines of code in C in your life, you are eligible. The course covers content from very basics. So you can enroll without much prior knowledge in microcontrollers. What is needed is a strong desire and passion to build projects!


Who will clarify my doubts?

Our expert trainers are available to clear your doubts. It is very simple. You will just have to select a time slot that is suitable for you (you will see this option once you start the course) and your trainer will call you at that time and help you. The doubt clarification sessions are always 1-1. So you can ask as many doubts as you want any number of times!


Should I return the kit after completing the project?

No, the kit is for you to keep. You need not return it after completing the project.
You can further upgrade your course and pay only for the additional components to build new projects!


I already have the hardware components with me. Can I get only the project assistance from Skyfi Labs?

Yes, you can enroll in the course opting for only training without kit. You will get a flat 50% discount for this.
You will get lifetime course video access, 1-1 expert assistance & smart certification. You can contact us at info@skyfilabs.com to get your 50% Off coupon code.


Can I access my course video modules after completing the project?

Yes, you can access the course video tutorials for lifetime. This will help you in reviewing the concepts learnt on the go and prepare well for your interviews/project presentations in the future.


Why should I choose Skyfi Labs?

Skyfi Labs, a venture by IIT Kanpur alumni, was founded with a motive to make learning by building projects super easy for students all across the globe. Training 2,50,000+ students across 30+ countries, Skyfi Labs got prestigious awards like 2nd Best Business Venture Award, Ideas, IIT Kanpur | 30 Most Promising Startups, Next Big Idea, IIM Bangalore | Runner-up, UnLtd India Growth Challenge etc. Our courses have also been in the curriculum of IIT Delhi for the last 5 years. With such an experience, you can be rest assured that you will get quality project training from Skyfi Labs.
If you still dont like it, dont worry. We offer 100% refund if you apply within 3 days of receiving the kit.


How can I contact Skyfi Labs?

Please feel free to contact us in case of any queries. Email: info@skyfilabs.com, Toll-free: 18001237177 (10AM - 8PM; Mon - Sat)
We prefer email contact as that can be replied by the right expert who can answer your question!


What is included in the fee?

The fee you pay includes:

  • Project kit
  • Course manual & content
  • Charges for support & shipping

Upon payment, we will also provide you with a tax invoice for the above mentioned.

Any more questions?