Latest Projects Based on Pressure

The conventional method of machining work-piece by formation of chips is very inefficient and expensive method on many counts. In view of these adverse and limiting characteristics of above conventional machining process, considerable effort has been made during the last few decades in developing and perfecting a number of newer methods, AJM is one of them which do not produce chips like conventional machining type.

DronDrones are something we call as UAV(unmanned Aerial Vehicles) an aircraft without an human pilot. UAVs are basically an ground controlled system means they are fully Autonomous. Application of Drones are expanding from commercial, scientific, recreational, agricultural, and other applications.IT can be used in Landways, waterways, airways or in space.

Hoverboard is a cool device having the ability to change its direction without steering or touching the handle. They are also called as self-balancing mini scooters. Hoverboard became unique due to its lightweight, compact size and pressure steering. It can rotate to 360 degrees just by changing the pressure through your feet.you can change your direction just by changing pressure or center of gravity of body.

which can measure rainfall and it can predict the weather condition with the notion in your smartphone. It's about the real-time weather condition. In this project, you are going to learn about how to make a smart umbrella using IOT that will be connected to your phone via Bluetooth or wifi. It can notify you before 30 min about to start rain or not or you have to take your smart umbrella with you by vibrating or led blinking to get your attention.

The one of major problem in today across world is the need of a drinking water as we know on our planet 71% is covered with water but even though only 2.5% of water available is drinkable where rest of the water is containing the salt or other minerals that type of water is called as the hard water. Recent Researches are done to convert the hard water to soft or drinkable water efficiently at mass scale and that will resolve the problem for the drinking water.

About the project

As we all know different branches existing in the engineering. Today we are in an era of fusion of such branches like mechanical combined with electronics is mechatronics, linkages with electronics lead to robots and so on. Similarly, there is another interesting type fusion of such of two different branches i.e. electronics and pneumatics.

A capillary tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes. The capillary tube is used as an expansion device in a vapor compression refrigeration system. In this project, you are going to calculate pressure drop in the various capillary tube for R22 refrigerant and air by varying capillary tube diameter keeping the length of the tube constant and varying the tube length keeping the diameter of tube constant with the help of control valve.

Centrifugal pumps are a sub-class of dynamic axisymmetric work-absorbing turbomachinery.Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.

About the project

Centrifugal pumps are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.

A turbopump is a propellant pump with a rotodynamic pump and a driving gas turbine. The purpose of a turbopump is to produce a high-pressure fluid for feeding a combustion chamber or other use.

About the project

An axial-flow pump, or AFP consists of a propeller in a pipe. The propeller can be driven directly by a sealed motor in the pipe or by electric motor or petrol/diesel engines mounted to the pipe from the outside or by a right-angle drive shaft that pierces the pipe.

A diaphragm pump also known as a Membrane pump is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or Teflon diaphragm and suitable valves on either side of the diaphragm to pump a fluid. There are three main types of diaphragm pumps.

After the invention of the wheel it made the evolution in the transportation. It made the transportation very easy and efficient. There are many evolutions after the invention of the stone wheel.

Latest Projects based on pressure