Latest Projects Based on Relay

Weather Monitoring is a Project where you can see the change in the weather remotely using your smartphone, so the main conditions in the weather monitor are the temperature, humidity, and the air quality. Weather can change at any time as it is uncontrollable but it can be monitored continuously and measures can be taken depending on the weather conditions. In this project, you will be able to monitor the conditions of the weather and receive the data to your phone.

The electronic device that you build as part of this project can assist a user in controlling all the home appliances via WiFi technology. The home automation device that you build can be integrated with almost all the home appliances and can be used to control them remotely from any part of the world.

In today’s world, Automation is one of the most trending topic for Research and Development. Through this project, you will develop a system that can control appliances we use every day like Fans, Lights, TV’s etc. by your voice itself and you can switch those devices on and off with your voice commands and we can store those devices present status (either switched on or switched off) automatically into a remote cloud and we can access them through our mobile or computer from anywhere on the world.

The conventional authentication technologies like RFID tags and authentication cards has a lot of weakness, biometric method of authentication is a prompt replacement for this. Biometrics such as fingerprints, voices and ECG signals are unique human characters that cannot be tampered or replicated. This facilitates real time system implementations. And it is also proven to be more accurate with less than 2 seconds of processing time, facilitating the authentication system to be faster and reliable.

Among most of trending topics, home automation is one the eye catching concept where R&D is happening at a very high rate. If we are talking about home automation, we will obviously go for wireless communication like Bluetooth, Wi-Fi technology, GSM technology. Among these things most effective communication is GSM, because it can be operated from very long distance and Output will be very accurate because we are going to control all the household devices by an SMS using GSM modem. This modem uses a SIM card and operates through a subscription with the mobile operator.

The main objective of this project is to build a smart home device which can be used to control the home appliances via internet. The home automation device that you build can be integrated with almost all the home appliances and can be used to control them remotely from any part of the world.

In today’s world, Automation is one of the most trending topic for Research and Development. Through this project, you will develop a system that can control appliances we use every day like Fans, Lights, TV’s etc. and with this system, you can switch those devices on and off with your Smart Phone and we can store those devices present status (either switched on or switched off) automatically into a remote cloud and we can access them into our mobile or Systems from anywhere from the world.

Today’s developing Technologies to reduce the risk of man life and the efficient of the machine in high accuracy, not in the manufacturing industries development and daily life the technology is improved.

The project involves controls the electrical devices that can be controlled by sending the instructions to the mobile phone that is connecter with it. The Control functions using the DTMF (Dual Tone Multiple Frequency) technology to establish the connection.

The circuit Breakers one of the most essential part used in electrical system. The circuit breakers are plays an important in the field it prevents the fault switch and prevents the instruments from the sudden changes from on the line.

A brake is a device by means of which frictional resistance is applies to a moving machine member, in order to retard or stop the motion of a machine. Most commonly brakes use friction between two surfaces pressed together to convert the kinetic energy of the moving object into heat slow down the motion of the vehicle.

Motor plays an important role in many engineering applications. Engineers always search for an efficient and easy way to control these motors. Some many techniques are available in both AC and DC. Pulse width modulation is used often to control DC motor.

As the conventional energy sources are depleting day by day, it is very essential to search for alternative energy sources. Nowadays belt conveyor is playing a key role in material handling application, they are used to carry materials from one end to another end. Based on the size, nature of the material, different conveyors are being used.

Nowadays Smartphones are common to all. Mobile phones have become a daily need where most of our works are done through it. The most common problem we face while using mobile phones is Charge in mobile. Through this project, you are going to build a unique project where mobile charging through coin boxes.

One of the most trending and curious topics in the field of power generation from natural resources is the power generation from footsteps. Generally, people who want themselves to be fit and healthy, go for jogging, walking. If we carefully observe, there is a lot of energy which had been dissipated by them. Whenever people run or walk, practically they are applying pressure on the ground to move. Through this project, you are going to convert that energy into Storable power. The Power which is stored in the battery will be used to Glow the street light.

One of the biggest problem the world facing now is Wastage of Power. Generally, in almost all the countries, you can see that whether there is vehicle present or not, the street will glow continuously for the entire night. Now imagine that there is a system where whenever the vehicle comes near the street light that street glows with full intensity and as soon as the vehicle move from that area the streetlight will be glow with very less intensity. Through this project, you are going to build a Power Efficient Street Lighting system.

Right now the entire world has taken steps to reduce the wastage of power. You may have observed that during night time whether anyone present on the road or not, the street lights will glow continuously for the entire night. Now imagine that there is a system where whenever someone is walking through the street, immediately Street lights are turned on and as soon as the person left the street, the street lights will be turned off. Through this project, you are going to build an autonomous street Lighting system based on occupancy.

After 150 years, the entire world will run out of the most important non-renewable Energy resource “Coal”, where 48% of the total power now is generated from it. Once it is exhausted, entire world is going to face severe power shortages. In order to avoid this shortage, the entire world has started focusing on the Renewable Energy Resources. A step further to this solution is hybridizing the Renewable Resources to generate power based on the availability to maintain continuity in the Power Generation. Through this project you are going to build a unique hybridized power generation system using Solar and Wind Energy.

Security alarm system employing various sensors are becoming increasingly popular in residential communities. Implementing a security alarm system that has a number of the sensor for fire detection, smoke detection, gas leakage detection, appliance operation.etc.

In home appliances the TV is the mostly available in every house.The television channel is changed by the tv Remote.Same way by pressing the tv remote the home appliance sload can be ON and OFF.

In industries, nowadays the temperature control has control conquered many of industrial sector in the industry plant where the air is cooled in order to maintain the temperature control.

There is a lot of electricity loss in homes due to the fans and lights that are kept on even when no one is present in the room. My idea is basically to inform a user that when he leaves his/her home if any of the basic appliances like the fans or lights, televisions, fans or air conditioners are left on accidentally, which are the basic and major electricity consuming appliances of our house. Some appliances like televisions and air conditioners consume electricity even when just their switchboard switches are on, it isn't much but a cumulative sum of a 1000 houses with the same condition would be a large enough number.

About the project

As we all know that we are in an era of advanced technology. The technology is reporting to next step in the ladder and the impact is that we are planning to build home in neighboring planets, we are printing human organs, we are travelling at a speed of sound, we are building a platform of data communication where data transfer rate is equal to or more than speed of light, we are printing materials in space and the list is infinite.

In automobiles, parking system is difficult to park the vehicle, needs to be more alert while parking in order to avoid hitting of the car during the reverse motion. Therefore to avoid, a concept of parallel parking is made.

Street lightening is an essential infrastructure for cities in order to assure the security of citizens and goods. This infrastructure has however, a high economic and ecological cost. The work aimed at developing a low cost, low power microcontroller to adjust the light of LED street luminaires.

This project is an electronic system which can be implemented by using Arduino & GSM Module to give a command and receive feedback. We will use the technique of power shedding.

In this urban life living it has become a necessity for automating everything. It is also useful when we forget something to turn off and it turns off automatically instead of people going back and turning it off.

In this era of technological advancement, we use automation for everything. There are many techniques to control devices automatically using Arduino, raspberry pi, which requires internet and some more modules to make it work.

It also requires a lot of programming to be done to make it work. Besides, this technique is costlier as we are using sensor and many more things, to control the respective appliances.

The health service industry is growing for a while now, thanks to the advancements in science and technology. As more scientific breakthroughs happen, the medical sector benefits from this, and as a result, the standard of living rises.

Power generation and transmission are essential and integral parts of maintaining any industry. Most companies, whether it be electrical or telephonic use underground cables to transmit power and transfer data. The damage done to these cables over time can lead to severe repercussions such as the loss of data, and power.

With advancements in science and technology coming at a break-neck pace, almost all fields of life have been impacted. More than ever before, there is a steep rise in the demand for smart devices, as people all over the world are switching to such intelligent devices to make their lives easier.

Introduction:

Fire is disastrous and it is important to take measures before a fire breaks out. Nowadays, fire detectors are installed almost in every public place be it malls, residential buildings, shops, and industries. These detectors alert about the fire and smoke early and inform using siren or buzzers. The traditional detectors only when the smoke or fire reaches a threshold, only then it triggers the buzzers which are not effective compared to the lives at stake. This project combines the traditional detectors with IoT, this not only signals the fire breakout but sends related information to the authorities timely so that they can avoid such mishaps even before it takes place.

Latest Projects based on relay