Latest Projects Based on Electric

Security systems is one of the most researched fields of today. Through this project, you will develop an electronic device that can detect the human activity and switch on the doorbell automatically to notify the residents. The system will also be connected to the internet and can send the data to the cloud spontaneously.

One of the most trending and curious topics in the field of power generation from natural resources is the power generation from footsteps. Generally, people who want themselves to be fit and healthy, go for jogging, walking. If we carefully observe, there is a lot of energy which had been dissipated by them. Whenever people run or walk, practically they are applying pressure on the ground to move. Through this project, you are going to convert that energy into Storable power. The Power which is stored in the battery will be used to Glow the street light.

Generating power for the fast growing world is a big challenge and which makes us to think and consider the alternate possible ways to generate power. Electricity is one of the basic need of human beings to do the daily means of work, and generating electricity by converting the form of energy is one of the best way to do it.

Water jet cutting method is one of the material removal type of rapid prototyping technique (RPT) which is been widely used in the automotive and aerospace industry to produce the complex and precise shape on a metal with minimum time and least effort being used.

The conventional method of machining work-piece by formation of chips is very inefficient and expensive method on many counts. In view of these adverse and limiting characteristics of above conventional machining process, considerable effort has been made during the last few decades in developing and perfecting a number of newer methods, AJM is one of them which do not produce chips like conventional machining type.

In today's world, we are facing scarcity of Electricity. Generally, in lots of places in INDIA and SOUTH AFRICA, some villages are not getting electricity. In that way, you might be thinking about the hydropower or wind or solar but there is something crazy about generating electricity through industrial machine sounds or sound produced by the crowd in stadium or vehicle traffic noise. Sounds cool right!
SLNOTE

Humans are harvesting energy in wonderfully different ways, which means they think a lot to innovate something which is helpful to society. It's not easy to think about the alternative energy apart from solar, hydro, biogas. Renewable energies are the best alternative energy in today's world. We are generating power through nature by converting heat/pressure/kinetic energy into electrical energy in a more effective way.

As we are running short of non-renewable energy resource, we need to increase our focus on renewable energy resources. As a part for contribution to solve above mentioned problem, you are going to build an innovative hybridised mobile charger which will get the power form solar and piezo electric transducers.

Today we are going to generate electricity from the difference in the heat it's nothing but Seebeck effect. We have to select the optimum material which is having high Seebeck coefficient. If we put in series also its mard even to generate 10mV. Peltier materials.

It's all about generating energy from people's footsteps. Every time the people walk we are capturing that kinetic energy and turns into electricity the more people walk moreover we can create. Well, it's not just about the power it's about power data and engagement. You can generate 10 seconds of light from one foot. We don't want any large transformer for generating power. Yes, this creation is helpful for human resources. It requires no natural resources.

Have you ever wondered how your refrigerator t your homework? It works on the principle of thermodynamics. Its a continuous process of changing the phase of refrigerant by changing volume, pressure and temperature.we are going some amount of work to it which comes as heat in the form of cold. For that, we are going to make a mini refrigerator having an electrical system to run instead of some costly coolant. We will run our mini refrigerator with seeback effect using an pietler material having a lot of connection of hot and cold junction. this hot and cold diffecence will create EMF can be stored in a battery or visa versa.

As you are well aware of the fact the natural energy is the need of future considering a small initiative by Government of India to supply electric current to every home in the country and supply it for 24 Hours, alternatives to hydropower, which credits natural energy its own importance in the market.

As you are well aware of the fact the natural energy is the need of future considering a small initiative by Government of India to supply Electric Power to every home in the country and supply it for 24 Hours, alternatives to hydropower, which credits natural energy its own importance in the market.

Talking about the impact of innovation on the human race, there are many inventions which have changed the world completely taking an example of electricity generation, the banking system, currency and the list of inventions is infinite. These revolutionary ideas had a such an impact on the world being, that its application can be still seen around, a similar revolutionary invention was the automobile. Credits to big minds like Nikolaus Otto, Gottlieb Daimler, Karl Benz, Henry Ford, Wright brothers and the list goes on.

About the project

As we all know that we are in an era of advanced technology. The technology is reporting to next step in the ladder and the impact is that we are planning to build home in neighboring planets, we are printing human organs, we are travelling at a speed of sound, we are building a platform of data communication where data transfer rate is equal to or more than speed of light, we are printing materials in space and the list is infinite.

Today the biggest problem we are facing in the electronics industry is the size of the battery as gadgets get thinner and smaller day by day.

Centrifugal pumps are a sub-class of dynamic axisymmetric work-absorbing turbomachinery.Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.

About the project

Centrifugal pumps are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.

A turbopump is a propellant pump with a rotodynamic pump and a driving gas turbine. The purpose of a turbopump is to produce a high-pressure fluid for feeding a combustion chamber or other use.

About the project

An axial-flow pump, or AFP consists of a propeller in a pipe. The propeller can be driven directly by a sealed motor in the pipe or by electric motor or petrol/diesel engines mounted to the pipe from the outside or by a right-angle drive shaft that pierces the pipe.

A diaphragm pump also known as a Membrane pump is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or Teflon diaphragm and suitable valves on either side of the diaphragm to pump a fluid. There are three main types of diaphragm pumps.

As long as the internal combustion engine has existed, engineers have been trying to find better ways of igniting the highly combustable mixture of air and gasoline that powers cars.

About the project

The new generation launching system StarTram is a proposal for a maglev space launch system. The initial Generation 1 facility would be cargo only, launching from a mountain peak at an altitude of 3 to 7 kilometres with an evacuated tube staying at local surface level; it has been claimed that about 150,000 tons could be lifted to orbit annually.

About the project

Perpendicular Wind Turbines. Rising sea levels and escalating pollution levels has generated worldwide interest and has given rise to new wind turbines designs.(Check out EWICON, Bladeless windmill)

About the project

Electromagnetic propulsion (EMP), is the principle of accelerating an object by the flowing electrical current and magnetic fields. The electrical current is used to create an opposing magnetic field for repell. When a current flows through a conductor in a magnetic field, an electromagnetic force known as a Lorentz force, pushes the conductor to perpendicular to the conductor and the magnetic field.

Biodiesel is a decent substitute for fossil fuel. In recent years biodiesel produced from animal fats and vegetable oil has grown attention. One of the reasons for this is Biodiesel is eco-friendly.

Nowadays a lot of waste is being generated daily. Developing countries like India, Brazil, Afghanistan are facing severe problem due to the rapid industrialization and urbanization. If the waste is not treated properly it will pollute the environment.

Urban migration is the major reason for the generation of large amounts of sewage water. To overcome that large number of sewage treatment plants are built.

Non-renewable energy sources are coming to an end as they are depended on the sources like coal, petrol. So, renewable energy generation is the right way to overcome energy demands.

Electricity is one of the important social need and many types of research are also going on in the generation of non-conventional electricity. Many countries are investing a large amount of money over renewable energy sources like solar energy and wind energy. But it consumes more space as well as a huge capital to build. They also cause pollution to the environment and need much manpower. It also requires raw materials to construct the setup.

Septic tanks are built in every residential house. The function of the septic tank is to reduce the pollution and content of pollutants in the wastewater. This is automatically done by the anaerobic bacteria that live in the septic tank. The septic tank provides favourable conditions for these anaerobic bacteria. This bacteria feeds on the organic material that presents in human waste and converts them into H+ ions and also produce a slight amount of methane gas.

We are in an era where we can’t live without electricity even for ten minutes. The major proportion of electricity is produced is from non-conventional or non-renewable sources. Thermal power station alone accounts for about 70 - 80% of the electricity generation.  And the remaining is produced by hydro, wind, etc.

The demand for electricity is rising day to day with growing industries and household electrical appliances. To fulfill the daily energy requirements different energy sources like coal, water, and solar energy are employed at a very high cost. About 2/3 of the energy generated by a conventional power station is lost in the form of waste heat that escapes out of a cooling tower. But if we use the waste heat and convert the heat energy as usable electricity will make the power generation much more efficient.

As per a survey, nearly 1.2 million people die in road accidents every year. In this project you will use piezoelectric sensor to detect collision. Then, system will send an SMS to any nearby hospital. The SMS will contain the location of the victim and personal details. As soon as they receive the SMS, they will send the AMBULANCE.

The demand for electrical energy is increasing day by day due to the change in our lifestyle and development in the world. As a result, nonrenewable energy sources are being decreased at a faster rate. So, to overcome the problem, we must adapt to an alternative power source.

Nowadays the demand for electricity is rising enormously with the growing industries. The mechanical energy produced by human locomotion or vehicle movement can be utilized to generate electric energy.

Are you interested in robotics and mechatronics? If you are an engineer with a passion for mechatronics, then you should invest in projects to gain more insight into your chosen field.

Over 40% of the road accidents that occur around the world, occur due to some issues related to brake failure. So, what can we do about this as engineers? As the number of vehicles on the road increase exponential, with every passing year, ensuring road safety becomes a principal concern. As engineers, we must create devices and concepts that will help to solve every-day problems. Brake failure is one such problem that hounds the automobile industry.

Most people who work with basic electronics would tell you that the worst part about it is getting small electric shocks! So what do we do to prevent this? But working with electrical components isn't the only time you get shocks. You can also get small shocks when you walk on a dry carpet, or even when you touch a doorknob sometimes.

Our life becomes very easy with the coming of new technologies like mobile phones, laptops, etc. Mobile phones are very essential for our daily life and is a basic requirement for everyone. One of the essential features that we want to give our smartphone is a good charging. Charging may become a problem for us while traveling to a place. For this purpose, the Solar cell phone charger can be used. Our main aim will be in this project is to charge our mobile phone with the help of a solar charger. The solar mobile charger project will require some wiring for the solar panel. We also need a switch and a booster model and connect them. We need to connect our mobile USB pin 2 power cables. Our phone will get it's charging when it will get proper radiation.

Printed Circuit Board (PCB) acts as a skeleton for the electronic components placed on it. It is found in almost all electronic devices. It is used to support mechanically and electrically connect electronic components with the help of conductive paths made of copper. All the components such as IC’s, sensors, resistors, capacitors are soldered to the PCB to form a PCB assembly.

In this electronics project, we will fabricate a PCB prototype to power an LED when a sound is produced. When you make a sound the microphone will detect the sound and convert it into an electrical signal. The electrical signal is then processed by the IC and it turns ON the LED.

Error Correction Codes (ECCs) recommends a delayed penalty in pervading the data as encoding or decoding has to be executed. ECCs are extensively used to conserve memory and to bypass data corruption. Due to hindering the use of ECCs in high-speed memories, it led to the use of Single Error Correction Double Error Detection (SECDED) codes. 

Multiple Cell Upsets (MCUs) becomes more familiar and restrict the use of SEC-DED codes unless they are joined with interleaving as technology scaled up. The biggest issue in memories is arising the errors which can be explained i.e. by radiation-induced soft errors that alter one or more memory cells, shift their values and other deficiencies cause permanent damage. 

ABSTRACT

In newly manufactured cars a lot of effort is put on reducing the background noise so that the person in the front seat can hear the voice from the rear seat. The main intension of this DSP project is to increase the audibility between the driver and the rear seat persons. This system is implemented in DSP –system in a test car, a microphone is placed in front of the driver to collect the speech and this microphone filters and remove the main part of the background noise. And loudspeakers are placed in the rear for the passenger to listen from the driver, there is a delay in sound of the driver to reach the passenger which makes the right voice of the driver. This evaluated system shows that there is increased audibility along with the no change in background noise.

Latest Projects based on electric