Latest Projects Based on Wireless Charging

With rapid development in conversion of communication with wires (land lines) to communication without wires (mobile phones), life has been revolutionised. The dream of radio engineering has come true. Now-a-days, many advancements in the mobile phones were introduced. Some of these advancements provide many services such as text, internet etc. But although there are many advancements in the technology, we still rely on the wired battery chargers.

Today almost all railway stations, bus stations are using Digital Display boards to show the all kinds of information, but they are connected wires. Through the project you are going to build a unique system where you can give provide information on the Electronic Notice Board in Wireless manner(where that notice board are controlled by an SMS using GSM modem). This modem uses a SIM card and operates through a subscription with the mobile operator. Many people they don’t know how to interface GSM module with 8051 microcontroller. We will see a series of steps describing how GSM modem will be interfaced with 8051 microcontroller.

Nowadays Smartphones are common to all. Mobile phones have become a daily need where most of our works are done through it. The most common problem we face while using mobile phones is Charge in mobile. Through this project, you are going to build a unique project where mobile charging through coin boxes.

Right now the most important and common thing for each and every one is Mobiles or Smartphones. But the problem we regularly face while using them is charging. So imagine there is a plug in the car which you can use it for charging mobile. The Power required for charging your mobile will be generated from the wheels. Does it sound new?? Yes, that’s true. Through this project, you are going to build a system where you can charge your mobile with the power generated from the motion of the wheels of your car.

Imagine there is a Robot which can be controlled from anywhere in the world. Is it possible?? Yes, it is possible with Wi-Fi Technology. Through this project you are going to build a unique Walking Robot which can be controlled using Wi-Fi.

Wireless Power Transfer technology removes the disadvantage of using the wired technology that is prevalent today. Certain drawbacks of wired power transfer technology being used are the reason for adopting wireless power transfer technology.

One of the major problems that is been faced by the planet earth is insufficient supply of the clean energy. we are simultaneously facing the three challenges – they are resource consumption, environmental degradation, and population growth.

With the blast of Smart Phones, Internet of things (IoT), Industrial Automation, Smart Home Automation systems and so forth the interest for internet is likewise developing exponentially. The technology has developed such a lot of that everything from our vehicle to our refrigerator needs an association with the web. This brings up different issues like; Will there be sufficient data transmission for every one of these gadgets? Will this information be secure? Will the current system be quick enough for everyone of this information? Will there be an excessive amount of combination on the network traffic?

Introduction:

Wireless power transmission is the effective transfer of power from one point to another through any medium or vacuum without the use of wires. It is used where there is an immediate or continuous energy need. The solar project focuses on delivering energy to devices using low power using wireless transmission. Resonating coils play a vital role here transmitting power from an ac source to resistive load.

Overview

How do we use a fan, we usually turn on the fan manually. But If the control is in your hands the speed control would be easy. Because there is no need to go near switchboard and vary fan speed. Easy process right? Yes, you heard that right! Control in your hands. This mini-project will make that process easy. We use the Bluetooth connectivity to control the speed of fan remotely. We use the combination of microcontroller and Bluetooth connectivity to achieve the purpose to control the speed of the fan.

Imagine you want to display your name on LCD display in front of your door or wherever you want. You want to change it again and again. In this Bluetooth controlled LCD project you will learn to display information on the LCD display and to change it via Bluetooth. We can change it over and over during necessity arises. We are using Bluetooth connectivity for this purpose. So, the command can be given only over the range of area of Bluetooth.

Latest Projects based on wireless charging