Latest Projects Based on Lipo Battery

An ornithopter is a flying machine technology that is adapted from the flying motion of real bird. Its working principle similarly to birds where it can flap the wings to fly. If the ornithopter is flying along with real birds no one can able to identify which one is real and which one is Robot. Because of that, these flying machines are used for tracking purposes as a spy bird.

These days drones are playing a very important role in all the sectors including the surveying lands. Drones make surveying of lands much faster than the conventional methods. Now drone simplifies the collection and analysis of geospatial data, allowing professionals to make better decisions.

Generally, as we know drones are can able to perform position held in the outdoors with the help of GPS module. In case if it is indoor it's very difficult to perform position hold why because the GPS cannot be able to receive the satellite signal.

It's a combination of both fixed wing and multi-copter. For flying fixed wing drone you need a bigger area for takeoff and landing. For multi-copter, you don't need a bigger area for takeoff and landing. But the fixed wing can carry more loads with less power consumed than the multi-copter. For the multi-copter, you don't need more area where it can fly any places.

Recent times all the drones are coming along with the obstacle avoidance technology where it can able to sense any kind of obstacle by using the sensors. This technology protects the drone from crashing.

Gesture recognition technology helps you to communicate or control any other devices via your hand gestures. From this technology, you can control the drone simply by moving your hands.

In conventional drone lipo batteries are used as a power source where you need to charge for every particular time period. The charging time alone will be taking more time due to which you cannot do continues flying. By adding the IC engine and DC generator with the conventional drone you can build a hybrid drone.

Whatever the drone that is available in the market, it has the endurance of maximum 30 - 40 minutes only. Once the battery got discharged, again that battery needs to be recharged completely to go for the next ride. Also it takes a lot of time to get recharged, which is a major issue in most of the UAVs that we see today.

Vertical takeoff and landing RC plane does not require more area for taking off and landing. To make this vtol we need a flight controller which can act as a brain of the vtol.

For a flying drone, people should have minimum knowledge of the flying skill then only they can able to fly properly without crashing, but it's not possible for all the people. If it is voice controlled means anyone can fly without any skill.

This is one of the most widely used UAV in all the places for different types of applications. Whether it is a quad or hexa or octa copter, this concept is the most widely used one. Here you are going to learn how to build a multicopter UAV.

Remote Controlled helicopter world there are basically of two types one with two types of blades on top (co axial blades) and once with one side of blades on top. And a active tail motor/rotor at the back which will give yawing stability (newton third Law). they also have gear and shaft for drive. Vet cool about this helicopter is that you can fly around your house. There are two motors one is at front which will control the rotation of helicopter with help of ESC and second one is micromotor at the tail part with micro prop. Lipo battery as a continuous power source for your model servo for bending of Swash plate.

Due to lack of circulation, water can become stale and undrinkable. In order to ensure safe and clean drinking water on board, your boat freshwater system needs to be sanitized if it hasn’t been used for some time, for example before your first use of the system after your boat has been stored for the winter. In order to clean boat water tanks, you have to remove the old water before starting the disinfection procedure.

Do you think by using battery constrain you to run the technology anywhere in the world or in a solar system. Our drawback is battery we need some platform or power source for storage of power in the form of chemical energy. What if you are making your project without battery sounds crazy right! You don't need to store energy anywhere or neither you need to convert into another form. What happens when you use the battery you are converting in the chemical energy to store in battery and then again to are converting into electrical energy in that process you are losing some amount of energy in form of power. Usually batteries are made of terrible chemicals among very few are being recycled and finally, in the end, we have to dispose of them in the earth which might be very dangerous for humans in future

The idea behind this project salt lamp is the chemical conversion of energy. It utilizes the scientific process behind the Galvanic cell, but instead of electrolytes, the SALt lamp uses saline solution, making it harmless and non-toxic. SALt lamp project is an LED lamp powered by the galvanic reaction of an anode with saline water. It also has a USB port to charge low-power mobile devices such as cellphones, smartphones, and mp3 players.The anode must be replaced approximately every six months and the saline water daily; sea water is usable.

A tricopter consists of three motors, three controllers, one servo and four gyros. The three motors are located at the end of each of the three arms. In addition, there is a location sensor in each case. This gyro controls the controllers, which are located in the fuselage of the aircraft. The motor is therefore nothing but a normal servo in one direction.

Latest Projects based on lipo battery