Latest Projects Based on Automobile

In today’s world, along with mobile phones, vehicles are also playing important an role in everyone’s day to day life. Most of the people who owned the automobiles either, drives by themselves or they will have a driver. Anyway 100% perfection is impossible to achieve in any domain, but we can reach maximum efficiency. Imagine that there is car with Automatic braking systems i.e. as soon other vehicle is approaching near your car or your car is approaching towards any object like Trees, Dividers, Humans etc., once safe distance is crossed immediately the brakes will be applied. Isn’t it cool?? Through this project you are going to build an Automatic Braking system for your vehicle.

In conventional drone lipo batteries are used as a power source where you need to charge for every particular time period. The charging time alone will be taking more time due to which you cannot do continues flying. By adding the IC engine and DC generator with the conventional drone you can build a hybrid drone.

Whatever the drone that is available in the market, it has the endurance of maximum 30 - 40 minutes only. Once the battery got discharged, again that battery needs to be recharged completely to go for the next ride. Also it takes a lot of time to get recharged, which is a major issue in most of the UAVs that we see today.

Go Kart is basically an open wheel car having less ground clearance and low center of gravity as compared to normal cars. generally, these cars are used for racing and obstacle racing. Both electric motor and engine can be used as power source. petrol and diesel (two strokes or four strokes) can be used as fuel. In our project, we are going to use an electric powered go Kart having battery and solar panel as a power source.

About the project

Ever wondered one the important factors involved when you are traveling for 100’s to 1000’s of kilometer? Ever thought of the comfort with which you have completed the journey with body organs stayed in the same place? Ever have you compared the modern travel with bullock cart? Suspension.

About the project

Have you ever wondered the possibility of high-speed racing competitions like formula racing, a century ago? We all are well aware of advancement made in transit field. A section of Engineers is working on an agenda on increasing the value rate of distance covered on a daily note. We can also see the improvements that we have seen and experience in last century.

As we all know the importance of the fuel for an automobile but have you ever wondered by we get the dark smoke out of the silencer, ever wondered why our engines make prickling sound? The reason is incomplete combustion of the fuel inside the combustion.

An automobile as we all know is an integral part of mankind’s day to day needs. Automobile technology as penetrated into different categories like emergency like transporting a patient in the ambulance or a war weapon to the war field, sports racing, the business application like transportation of goods, transportation of meetings and the list goes on.

Maglev trains are a revolutionary development in railways systems as well as transportation engineering. The speed, the smooth operations, convenience, easy maintenance has made it is a basic need for any developing country to manage the transportation of citizens.

About the project

Alternate power sources are rapidly spreading into research fields. Multiple sources are being experimented to replace the combustion fuels from petroleum products. One such experiement is power by aluminium

Hovercrafts are vehicles that travel over the cushion of air created with the help of motors and propellers. Hovercrafts can reach almost all the terrains on earth. The principle behind the development of air-cushion is the closed plenum effect. The high-pressure air is accumulated below the hull with the help of motors and propellers. The skirt is used to increase the ground clearance of the vehicle which helps to achieve the smooth ride over big tide waves, rocky terrains, etc. In this article, you will learn to build an RC Hovercraft using Arduino.

The primary purpose of this wireless black-box model is to build a black box device for automobiles which can be mounted into any vehicle worldwide. This concept is often formulated with minimal circuit area.

In this CAD project, you will learn to design and simulate a differential gear using Autodesk Inventor software. Autodesk Inventor software is widely used by design engineer professionals to create 2D and 3D models of various parts.

Earlier, manufacturers used to draw the 2D diagram of the product to be designed in different views - front view, side view, and top view. Then, they will start to manufacture and test the model. Here a lot of time is invested in manufacturing and testing. To overcome the above issue designers started using CAD software. CAD stands for Computer-Aided Design which is used to design, test and analyze the model.

CAD (Computer Aided Designing) is the process of making a 2D or 3D design of a product using the design software which makes designing and upgrading the product design faster compared to the manual drawing.

In this CAD project, we are going to use Autodesk Inventor software to design a Gear train assembly. Autodesk Inventor is a 3D CAD software that enables the user to design, simulate, visualize and create documentation for a product.

Recent advancement in aerospace and automobile paved the way for new gadgets. Hoverbike is one such innovation which combines the technology of helicopter and bike to make the transportation better.

In this aeronautical project, we will discuss the design consideration, applications and materials used to build the hoverbike. Also, you will learn to build a miniature hoverbike.

Latest Projects based on automobile