Free shipping to

What you'll receive

  • animatronic hand kit delivered to your doorstep
    animatronic hand Kit

    Your kit, tested and shipped in 24 hours

  • Learn and build your animatronic hand project from anywhere, anytime
    Online Course

    Learn and build your project anywhere, anytime

  • Build animatronic hand project and showcase your practical skills to the world
    Smart Certificate

    Showcase your practical skills to the world

  • Clear your doubts on animatronic hand project through dedicated 1-1 sessions
    1-1 Expert Support

    Clear your doubts in dedicated 1-1 sessions

What you'll build
  • delivery icon
    Working animatronic hand Project

    Impress your interviewers, teachers and friends

  • Develop technical skills by building animatronic hand project

    Not a 'paper engineer'. Be a real, practical engineer

  • Build portfolio by building animatronic hand project

    Projects portfolio. Not bunch of certificates.

  • Grab the best jobs and higher education opportunities by building animatronic hand project
    A Career

    Grab the best jobs and higher education opportunities

Why build an animatronic hand project?

Animatronics is the technology where machines/robots imitate human and animal activities like walking, moving arms, facial expressions etc.
You can build machines and control them by moving your hands, fingers and facial muscles.
In this course, you will build an animatronic hand that copies the motion of your own hand. Have fun building your very own animatronic hand!

animatronic hand Project Thumbnail
What you'll learn in this course

In this course, you will learn to design, fabricate and control an animatronic hand using embedded systems. The animatronic hand that you build can be controlled with your hand movements with the help of flex sensors.
By building this project you will learn about:

  1. Arduino architecture and its programming
  2. Working of the servo motors - which acts as actuators
  3. Design, fabrication of flex sensors

youtube video
youtube video
  • Learn: What is Animatronics?
  • Learn: Schematic of an Animatronic Hand
  • Learn: Components of Designing Animatronic Hand
  • Review: What is Animatronics?
  • Learn: Flex Sensor: Concept and Structure
  • Do: Fabrication of Flex Sensor
  • Do: Voltage Divider Circuit
  • Do: Testing of Flex Sensor
  • Review: Flex Sensor
  • Do: Arduino - An Introduction
  • Do: Connect and Detect the Arduino Uno
  • Review: Brain of the animatronic hand
  • Learn: Introduction to Arduino IDE
  • Learn: Structure of Arduino Programming
  • Do: First program in Arduino: Blinking LED
  • Do: Basic programing practice
  • Review: Arduino Programming
  • Learn: Servo Motors: Concepts & Applications
  • Do: Make a Servo Work using Arduino
  • Review: Servo Motors
  • Do: Design of Animatronic Hand
  • Do: Armature Fabrication of Animatronic Hand
  • Do: Controls of the Animatronic Hand
  • Do: Connections of the Servos
  • Learn: Program for the working of the AH
  • Do: Write and Burn the Code
  • Do: Testing Animatronic Hand
  • Review: Upload assignment & download certificate
How can you build this animatronic hand project?
1) Enroll

Get access to course instantly. Kit will be shipped within 24 hours.

2) Learn

Access video lectures, tutorials and quizzes to learn the technology in animatronic hand project

3) Build

Use the kit and practical sessions in course to build your animatronic hand project

4) Submit assignment

Complete the course and submit your assignment to get your certificate

Get Started Now

Signup and try our first few chapters free of cost. Pay only when you like it!

Self Paced
Enroll together. Pay less
Team of 5 $41 /student
Team of 4 $45 /student
Team of 3 $53 /student
Team of 2 $68 /student
Team of 1 $112 /student

You can also add friends later

Live Online
Enroll together. Pay less
Team of 5 $61 /student
Team of 4 $68 /student
Team of 3 $79 /student
Team of 2 $101 /student
Team of 1 $168 /student

You can also add friends later

Want in your institute?
Organize a Workshop

Our experts will visit your college/ school/ office with the kits and conduct an awesome hands-on workshop.

Learning will not be more fun than this!

Frequently Asked Questions about animatronic hand project
How to build a animatronic hand project?

Login to our online learning portal will be provided instantly upon enrollment. The portal will have video lectures, tutorials, and quizzes required to build the animatronic hand project. Kits are well tested and shipped to your doorstep in 24 Hours. Use the kit along with the online portal to complete the project at your home itself.
You can enroll for free demo to understand how it works better. Pay only when you are confident and if you like it!

How much time do I have to complete the animatronic hand project?

You need to complete the project within 45 days of enrollment. Generally, the project would take 16-20 hours to complete.

What will be in the animatronic hand project kit that I will receive?

You will get all the components needed to build a animatronic hand project. The following are the list of components that you will get in the kit,

  • Arduino Uno Board
  • UART Cable
  • Servo Motors - 3 Nos.
  • Coroplast
  • Resistors - 3 Nos.
  • Flex Sensors
  • Cotton Glove
  • IC 7805
  • Bread Board & Conductive Foam
  • Wire Stripper & Screw Drivers
  • Male Pin Connectors
  • Eight Core Cable
  • Coro Cutter
  • Other miscellaneous items
  • Course Manual

Should I enroll in Online Course or Offline Workshop?

To help you select the right mode of learning, here are the features of both:

FeaturesClassroom TrainingOnline project based course
KitWill be given in class & taken back after the trainingWill be dispatched to you in 24 Hours
Doubt Clarification1 trainer to 40-50 studentsPersonal 1-to-1 session (Video/Chat) with our experts
FlexibilityFixed place and timeAnywhere, Anytime - at your convenience
VenueFixed, only when schedulesAnywhere as per your convenience
Additional cost for studentTravel, Accommodation to reach the venueNo additional costs
RefundOnly before training program startsUpto 3 days of receiving the kit
Revision Using study material in pdf formatSee the video lectures/tutorials any number of times
Pause & ResumeNot possiblePause and resume any number of times
Hands-on session1 trainer to 40-50 studentsHigh clarity videos showing clear steps which can be reviewed any number of times
CertificationUpon Completion Upon Completion
ExaminationOnline at extra feeInbuilt in the course

Can my friends build along with me?

Ofcourse, and we strongly encuorage that. The course is fun and learning is more effective when you work together, learn together and build together!

  • A team can have maximum of 5 members.
  • All team members will get separate logins and certificate.
  • One kit will be sent per team.

Why does your kit look rugged?

With Skyfi Labs you get to build projects from scratch “literally”. Building projects using rugged components will give you the confidence of a creator and helps you to realise that products can be “created” rather than “assembled”.

We want you to believe that you don't need factory-made kits to innovate and innovation is something that happens in your brain. We want you to have a mindset of using components available around you for innovation and not look at amazon for kits.

Am I eligible for this course?

If you have written even 5 lines of code in C in your life, you are eligible. The course covers content from very basics. So you can enroll without much prior knowledge in mechatronics. What is needed is a strong desire and passion to build projects!

Who will clarify my doubts?

Our expert trainers are available to clear your doubts. It is very simple. You will just have to select a time slot that is suitable for you (you will see this option once you start the course) and your trainer will call you at that time and help you. The doubt clarification sessions are always 1-1. So you can ask as many doubts as you want any number of times!

Should I return the kit after completing the project?

No, the kit is for you to keep. You need not return it after completing the project.
You can further upgrade your course and pay only for the additional components to build new projects!

I already have the hardware components with me. Can I get only the project assistance from Skyfi Labs?

Yes, you can enroll in the course opting for only training without kit. You will get a flat 50% discount for this.
You will get lifetime course video access, 1-1 expert assistance & smart certification. You can contact us at to get your 50% Off coupon code.

Can I access my course video modules after completing the project?

Yes, you can access the course video tutorials for lifetime. This will help you in reviewing the concepts learnt on the go and prepare well for your interviews/project presentations in the future.

Why should I choose Skyfi Labs?

Skyfi Labs, a venture by IIT Kanpur alumni, was founded with a motive to make learning by building projects super easy for students all across the globe. Training 2,50,000+ students across 30+ countries, Skyfi Labs got prestigious awards like 2nd Best Business Venture Award, Ideas, IIT Kanpur | 30 Most Promising Startups, Next Big Idea, IIM Bangalore | Runner-up, UnLtd India Growth Challenge etc. Our courses have also been in the curriculum of IIT Delhi for the last 5 years. With such an experience, you can be rest assured that you will get quality project training from Skyfi Labs.
If you still dont like it, dont worry. We offer 100% refund if you apply within 3 days of receiving the kit.

How can I contact Skyfi Labs?

Please feel free to contact us in case of any queries. Email:, Toll-free: 18001237177 (10AM - 8PM; Mon - Sat)
We prefer email contact as that can be replied by the right expert who can answer your question!

What is included in the fee?

The fee you pay includes:

  • Project kit
  • Course manual & content
  • Charges for support & shipping

Upon payment, we will also provide you with a tax invoice for the above mentioned.

Any more questions?