Free shipping to
What you'll receive
  • hexapod kit delivered to your doorstep
    hexapod Kit

    Your kit, tested and shipped in 24 hours

  • Learn and build your hexapod project from anywhere, anytime
    Online Course

    Learn and build your project anywhere, anytime

  • Build hexapod project and showcase your practical skills to the world
    Smart Certificate

    Showcase your practical skills to the world

  • Clear your doubts on hexapod project through dedicated 1-1 sessions
    1-1 Expert Support

    Clear your doubts in dedicated 1-1 sessions

What you'll build
  • delivery icon
    Working hexapod Project

    Impress your interviewers, teachers and friends

  • Develop technical skills by building hexapod project

    Not a 'paper engineer'. Be a real, practical engineer

  • Build portfolio by building hexapod project

    Projects portfolio. Not bunch of certificates.

  • Grab the best jobs and higher education opportunities by building hexapod project
    A Career

    Grab the best jobs and higher education opportunities

Why build a hexapod project?

A hexapod robot is a mechanical robot that walks on six legs.
It imitates insect crawling motion and is the most famous one in the legged robots category.
Due to its "legs", it can even move on slightly rocky and uneven terrains and so it is preferred mode where there are no roads!
In this course, you will learn and build your own Hexapod robot. How cool is that!

hexapod Project Thumbnail
What you'll learn in this course

In this course, you will learn to build your very own Hexapod Robot that can be controlled via smartphones using a Bluetooth controlled Android App. To ease your programming learning experience, the course is also equipped with scratch based block programming modules that make programming the hexapod super easy for you.
By building this project you will learn about:

  1. Robot's Locomotion
  2. Crawling Strategy of Hexapods
  3. Arduino architecture and its programming
  4. Working of the servo motors - which acts as actuators
  5. Wireless Actuation of Legged Robots

youtube video
youtube video
  • Learn: Mobility of Robotics
  • Learn: Hexapod - Concept
  • Do: Hexapod - Kit Unpacking
  • Do: Assembly of Hexapod Legs
  • Review: Robots and Hexapod
  • Learn: Arduino: An Introduction
  • Learn: Arduino Architecture - Structure & Features
  • Learn: Arduino Architecture - Pin Diagram
  • Do: Arduino - An Introduction
  • Do: Connect and Detect the Arduino Uno
  • Review: Arduino: An Introduction
  • Learn: Programming Arduino through Blocks
  • Do: Practice Programs in Arduino using Blocks
  • Review: Graphical Programming for Beginners
  • Learn: Introduction to Arduino IDE
  • Learn: Structure of Arduino Programming
  • Do: First program in Arduino: Blinking LED
  • Do: Basic programing practice
  • Review: Arduino Programming
  • Learn: Servo Motors: Concepts & Applications
  • Learn: Control Servo Motors using Arduino
  • Do: Zero Setting of Servos
  • Do: Power Circuit for Multiple Servos
  • Review: Actuation in Legged Robots
  • Do: Servo Mounting
  • Do: Fixing Servos to Legs
  • Do: Assembly of Hexapod
  • Do: Mount Arduino & Power Circuit
  • Review: Fabrication of Hexapod
  • Learn: Crawling Strategy of Hexapod
  • Learn: Programming Logic for Crawling
  • Do: Block program for Forward Hexapod Motion
  • Do: Design Arduino Sketch for Walking Motion
  • Review: Programming the Hexapod
  • Learn: Bluetooth Communication
  • Do: Installation of App
  • Do: Interfacing Bluetooth to Arduino
  • Do: Reading Data from Bluetooth
  • Review: Bluetooth Technology
  • Do: Programming Logic of Bluetooth Controlled Hexapod
  • Do: Design Arduino Sketch
  • Review: Programming the Hexapod
  • Do: Testing of Hexapod
  • Do: Upload your Hexapod video
  • Do: Download your Certificate
How can you build this hexapod project?
1) Enroll

Get access to course instantly. Kit will be shipped within 24 hours.

2) Learn

Access video lectures, tutorials and quizzes to learn the technology in hexapod project

3) Build

Use the kit and practical sessions in course to build your hexapod project

4) Submit assignment

Complete the course and submit your assignment to get your certificate

Get Started Now

Signup and try our first few chapters free of cost. Pay only when you like it!

Self Paced
Enroll together. Pay less
Team of 5 $59 /student
Team of 4 $68 /student
Team of 3 $83 /student
Team of 2 $112 /student
Team of 1 $202 /student

You can also add friends later

Live Online
Enroll together. Pay less
Team of 5 $88 /student
Team of 4 $101 /student
Team of 3 $124 /student
Team of 2 $168 /student
Team of 1 $303 /student

You can also add friends later

Want in your institute?
Organize a Workshop

Our experts will visit your college/ school/ office with the kits and conduct an awesome hands-on workshop.

Learning will not be more fun than this!

Frequently Asked Questions about hexapod project

How to build a hexapod project?

Login to our online learning portal will be provided instantly upon enrollment. The portal will have video lectures, tutorials, and quizzes required to build the hexapod project. Kits are well tested and shipped to your doorstep in 24 Hours. Use the kit along with the online portal to complete the project at your home itself.
You can enroll for free demo to understand how it works better. Pay only when you are confident and if you like it!

How much time do I have to complete the hexapod project?

You need to complete the project within 45 days of enrollment. Generally, the project would take 16-20 hours to complete.

What will be in the hexapod project kit that I will receive?

You will get all the components needed to build a hexapod project. The following are the list of components that you will get in the kit,

  • Arduino Uno
  • High Torque Servo Motors
  • HC05 Bluetooth Module
  • Multipurpose Servo Brackets
  • U Clamps
  • Wooden Chassis
  • Barrel Connector
  • Wire Stripper
  • Course Manual
  • Battery Connector
  • Metal Servo Horn
  • Peforated Aluminium Strip
  • Slotted Angle Metal Strip
  • Single Pin Connectors
  • Screws & Nuts
  • Breadboard
  • Screwdriver

Should I enroll in Online Course or Offline Workshop?

To help you select the right mode of learning, here are the features of both:

FeaturesClassroom TrainingOnline project based course
KitWill be given in class & taken back after the trainingWill be dispatched to you in 24 Hours
Doubt Clarification1 trainer to 40-50 studentsPersonal 1-to-1 session (Video/Chat) with our experts
FlexibilityFixed place and timeAnywhere, Anytime - at your convenience
VenueFixed, only when schedulesAnywhere as per your convenience
Additional cost for studentTravel, Accommodation to reach the venueNo additional costs
RefundOnly before training program startsUpto 3 days of receiving the kit
Revision Using study material in pdf formatSee the video lectures/tutorials any number of times
Pause & ResumeNot possiblePause and resume any number of times
Hands-on session1 trainer to 40-50 studentsHigh clarity videos showing clear steps which can be reviewed any number of times
CertificationUpon Completion Upon Completion
ExaminationOnline at extra feeInbuilt in the course

Can my friends build along with me?

Ofcourse, and we strongly encuorage that. The course is fun and learning is more effective when you work together, learn together and build together!

  • A team can have maximum of 5 members.
  • All team members will get separate logins and certificate.
  • One kit will be sent per team.

Why does your kit look rugged?

With Skyfi Labs you get to build projects from scratch “literally”. Building projects using rugged components will give you the confidence of a creator and helps you to realise that products can be “created” rather than “assembled”.

We want you to believe that you don't need factory-made kits to innovate and innovation is something that happens in your brain. We want you to have a mindset of using components available around you for innovation and not look at amazon for kits.

Am I eligible for this course?

If you have written even 5 lines of code in C in your life, you are eligible. The course covers content from very basics. So you can enroll without much prior knowledge in mechatronics. What is needed is a strong desire and passion to build projects!

Who will clarify my doubts?

Our expert trainers are available to clear your doubts. It is very simple. You will just have to select a time slot that is suitable for you (you will see this option once you start the course) and your trainer will call you at that time and help you. The doubt clarification sessions are always 1-1. So you can ask as many doubts as you want any number of times!

Should I return the kit after completing the project?

No, the kit is for you to keep. You need not return it after completing the project.
You can further upgrade your course and pay only for the additional components to build new projects!

I already have the hardware components with me. Can I get only the project assistance from Skyfi Labs?

Yes, you can enroll in the course opting for only training without kit. You will get a flat 50% discount for this.
You will get lifetime course video access, 1-1 expert assistance & smart certification. You can contact us at to get your 50% Off coupon code.

Can I access my course video modules after completing the project?

Yes, you can access the course video tutorials for lifetime. This will help you in reviewing the concepts learnt on the go and prepare well for your interviews/project presentations in the future.

Why should I choose Skyfi Labs?

Skyfi Labs, a venture by IIT Kanpur alumni, was founded with a motive to make learning by building projects super easy for students all across the globe. Training 2,50,000+ students across 30+ countries, Skyfi Labs got prestigious awards like 2nd Best Business Venture Award, Ideas, IIT Kanpur | 30 Most Promising Startups, Next Big Idea, IIM Bangalore | Runner-up, UnLtd India Growth Challenge etc. Our courses have also been in the curriculum of IIT Delhi for the last 5 years. With such an experience, you can be rest assured that you will get quality project training from Skyfi Labs.
If you still dont like it, dont worry. We offer 100% refund if you apply within 3 days of receiving the kit.

How can I contact Skyfi Labs?

Please feel free to contact us in case of any queries. Email:, Toll-free: 18001237177 (10AM - 8PM; Mon - Sat)
We prefer email contact as that can be replied by the right expert who can answer your question!

What is included in the fee?

The fee you pay includes:

  • Project kit
  • Course manual & content
  • Charges for support & shipping

Upon payment, we will also provide you with a tax invoice for the above mentioned.

Any more questions?