Latest Projects Based on Minitab

It is expensive to use physical experiments to get essential engineering data for designing is quite expensive. Getting engineering data of a fluid in motion, using Computational Fluid Dynamics (CFD) Simulations are relatively inexpensive. Costs are likely to be decreased as computational power has increased. So, using numerical methods to solve various flow problems is effective. In this project, you are going to solve a 1D Shock tube problem using Finite Volume Method.

All the engineering devices we use involves the conversion of energy. In this process, a lot of heat released to the surroundings as a part of energy loss. The efficiency of any device can be increased by minimizing loss due to heat transfer. That’s why a lot of research going on around the world in the field of heat transfer. To solve real-life heat transfer problems Numerical methods are preferred, because of less time consumption, ease, and convenience. To get hands-on experience on numerical methods, here you are going to solve the Two-Dimensional flat plate problem with Constant conductivity heat transfer by using Numerical methods.

The Aerospace industry is increasingly relying on advanced numerical flow simulation tools for analyzing all the components of aircraft. The main part which helps in producing lift is wings. So, the shape of the aerofoil should be designed in such a manner so that maximum lift can be achieved. In this project, you are going to work on a standard NACA airfoil and analyze it using finite element volume tool AcuSolve. Then you have to validate your numerical result with the wind tunnel experiment result.

Heat Exchangers are widely used in most engineering fields, such as the process, power, automotive, cryogenics, refrigeration, air conditioning, heat recovery, manufacturing industries, etc. So, a lot of research is going on to develop and improve heat exchanger effectiveness. In this project, you are going to Analyze fluid flow in a heat exchanger using an analysis software and then compare the result data with the experimental result of a Heat Exchanger setup.

Analytical solutions give exact solutions that can be used to study the behavior of the system with varying properties. Unfortunately, very few practical systems lead to analytical solutions, and again the use of analytical solutions is of limited use because of its difficulty. That’s why we use a numerical approach to make a close answer to practical result with ease and convenience. Recently there is a lot of research going on in this field. Doing a project in this field will give you an advantage over others. In this project, you are going to write your own code to solve a one-dimensional nozzle problem using numerical approach and you have to find out the properties of fluid flowing through the nozzle along its length.

Latest Projects based on minitab