Latest Projects Based on Electronic

The three main medium of transports are Land, Air and Water where this project is mainly focused on design parameter and fabricating the RC controlled Speedboat. As we know speedboats are the fastesr way to travel on water as they sail at comparatively higher speed than the conventional boats and ships. Hence the designing of boats plays an important role where the fluid dynamics is the major area to focus and optimize the design for less hydro-static drags.

A tricopter consists of three motors, three controllers, one servo and four gyros. The three motors are located at the end of each of the three arms. In addition, there is a location sensor in each case. This gyro controls the controllers, which are located in the fuselage of the aircraft. The motor is therefore nothing but a normal servo in one direction.

About the project

Ever wondered the reason behind the design of human leg palm? Ever wondered why leg palm not circular like the wheels we have in our cars or like cube block? Well, the profile of human sole has a tremendous amount of importance when it comes the application is to step over different terrains and surfaces. It is very important to gain the grip on different terrain, this is where wheels are ineffective.

Drink & drive is a leading cause of road accidents. Detecting drunk driving requires stopping vehicles and manually scanning drivers by using breath analyzers. Well, here this is a system which allows detecting drunk driving in the vehicle itself. The system uses an alcohol sensor with raspberry pi along with a GSM modem for SMS notification.

The Programmable Logic Controller (PLC) is a dedicated controller designed for industrial usage. It contains the various types of I/Os that are very suitably matching with the industrial instrumentation and plant control interfaces. It provides the flexibility in the programming options especially the "ladder language" that is similar to the industrial standard "ladder Network" used for designing automatic control schemes in the plants. So, getting a hands-on experience on PLC is important for an engineer to match the industrial standards. In this project, you will work on making an Automatic door using PLC.

The project title is Design and Implementation of Lift machine Control System using Field Programmable Gate Array (FPGA). In this modern era, lifts have become an integral part of any commercial or public complex. The control system is one of the most important aspects of the electronics control module that are used in the automotive application. The lift system is also known as an elevator controller. The elevator controller will be fully designed on the FPGA board using a simple I/O interface on the FPGA board. The controller will be used in any type of elevator and it will produce a single chip controller compare to other controllers that will need more than one chip.

The Programmable Logic Controller (PLC) is a dedicated controller designed for industrial usage. It contains the various types of I/Os that are very suitably matching with the industrial instrumentation and plant control interfaces. It provides the flexibility in the programming options especially the "ladder language" that is similar to the industrial standard "ladder Network" used for designing automatic control schemes in the plants. So, getting a hands-on experience on PLC is important for an engineer to match the industrial standards. The aim of this project is to develop a drive system which can regulate the speed of the DC motor with the help of the Proximity sensor.

Water is the world’s most precious resource, yet it is also the one which is almost universally mismanaged. As a result, water shortages are becoming ever more common. Leakages, overflow of water and bursting of pipes these all most common in waste of water. So as to detect all these problems here you are going to work on the building, tank water level sensing monitoring and water pipeline leakage sensing monitoring system.

The demand for dual-band or multiband systems is tremendously increasing in modern wireless communication. This is because the dual band or multiband filters reduces the circuit size by employing a single or common configuration for multiple operation or application. In this project, you will design and develop novel, low cost and compact microstrip Dual Band Pass Filter for microwave/wireless systems with simple physical topology, single-layer configuration, and broad stop-band.

A solar roadway is a road surface that generates electricity by solar panels and LED signal that can be driven on. It generates electricity by solar power photovoltaic cells.

About the project

Drones are everywhere in the world. It is estimated that by the year 2020 there will be approximately 7 million drones in the sky and looking the trend it is important to ensure that drone enthusiasts are operating in a peaceful and safe manner.

About the project

Biotechnology is powerful, but only for those with the tools to experiment with and utilize it. Biotechnology combined with 3d printing can be make wonders and leads to bioprinting, tissue engineering, centrifuge dna extractor.

Electronic industry is the world’s largest and innovative industry for its kind. Every year tons of electronic items get shipped over oceans. Yet, after their usage time, they become a complex waste matter. It consists of many hazardous heavy metals, acids, toxic chemicals, and non-degradable plastics.

In today’s world drones are widely used for various applications. A lot of cool things can be done with the help of drones. Drones with quad configuration are used for major application because of the following reasons: simple in design, agility and easy to control. But the quad configuration has some disadvantages like more power consumption compared to tri and twin copters, Quad frame occupies more area and flight time is also less.

Drones are Unmanned Aerial Vehicles which finds application in different fields. Nowadays drone racing gained more popularity and experts claim it will be even more popular in the near future. However, drones used for racing are not the same as the commercial drones used for photography and delivery. Racing drones are small quads that specially built for racing. They are designed to be more agile and travel at higher speeds to perform complex stunts.

Some people have gardening as a hobby. They spend their spare time in their gardens. However, because of the increasing pace of life, some of them are not able to find time for gardening. In this project, you will try to help these people.

Power generation and transmission are essential and integral parts of maintaining any industry. Most companies, whether it be electrical or telephonic use underground cables to transmit power and transfer data. The damage done to these cables over time can lead to severe repercussions such as the loss of data, and power.

With advancements in science and technology coming at a break-neck pace, almost all fields of life have been impacted. More than ever before, there is a steep rise in the demand for smart devices, as people all over the world are switching to such intelligent devices to make their lives easier.

Our daily activities can be performed very easily nowadays by automation. This automation project is a system by which we can control our home appliances with the help of a PC. The systems are more accurate and reliable than manual systems. It is an electronics and communication project based on wireless technology. The project will use radio frequencies and Arduino UNO by which we will be able to control the circuit. The project aims to connect our devices to the computer for automation purposes.

Our life becomes very easy with the coming of new technologies like mobile phones, laptops, etc. Mobile phones are very essential for our daily life and is a basic requirement for everyone. One of the essential features that we want to give our smartphone is a good charging. Charging may become a problem for us while traveling to a place. For this purpose, the Solar cell phone charger can be used. Our main aim will be in this project is to charge our mobile phone with the help of a solar charger. The solar mobile charger project will require some wiring for the solar panel. We also need a switch and a booster model and connect them. We need to connect our mobile USB pin 2 power cables. Our phone will get it's charging when it will get proper radiation.

It has occurred several times when two trains collide with each other which became a big accident. It leads to the loss of many people’s lives and we need to have proper security for that. This project aims to control these types of accidents by controlling the railway tracks. Due to some carelessness and the same track, this type of incident occurs. Our anti-collision system for train projects will use sensor techniques by which we can track trains and monitor them.

In this project, we will design an electronic notepad. It has a touch screen and a storage memory. It can also save the data which we have written. It will also provide the facility to transfer your data to your personal computer. The process will be done with the help of some software and displays. It will work with accuracy so that it can display your drawings. We will insert an SD card into the circuit. By serial connections, the microcontroller will transfer the data.

A cell phone jammer is a device that is used for transmitting signals. It disables all the mobile signals in a particular area. This instrument also protects cell phones from signals. The same frequency signals were broadcasted by this device through GSM. When we enable it in some areas, all the signals get disabled and then we can say it as a successful mobile jammer. It works by transmitting the signal from the station and mobile phone. It also creates an interface for communication. It is generally used for transmitting the signal of CDMA, 3G, GSM.

Candles are being used for light from ancient times. Before the invention of the light bulb, candles are being used for the light. They have been in use from ancient time. In recent times they are used in churches. Our project depends on electronic candles. Ordinary candles melt very fast and the place where they are used gets nasty. In this electronic candle project, we will make an electric candle with the help of an LED. It will be capable of turn on automatically during darkness and also shut down when they find some light.

These devices are very useful for athletes. It will provide the athletes real-time updates of angle, direction, acceleration, etc. It is also very helpful during their training. The device is very useful for their health and they get help from this device by knowing their health status. It is also very helpful for the audience as the audience can understand the game. Also, a player can improve their performance due to this device and learn new skills. One of the key points of this device is that it is Bluetooth and Wi-Fi enabled. It will collect the data and send it to the cloud so that it can be accessed from anywhere we want to.

Fire Alarms are prime necessities in present-day structures and models, be it high-rises, homes, offices, public places or even automobiles. They recognize any fire in the room by detecting smoke or/and warmth and raise an alert which cautions individuals about the fire and gives adequate time to take preventive measures. Here we are building one straightforward alarm framework with the assistance of 555 Timer IC, which will detect the fire (by monitoring temperature changes), and trigger the alarm. The key part of the circuit is the Thermistor, which has been utilized as a fire locator or fire sensor. A thermistor is a temperature delicate resistor, whose resistance changes as per the temperature.

With the blast of Smart Phones, Internet of things (IoT), Industrial Automation, Smart Home Automation systems and so forth the interest for internet is likewise developing exponentially. The technology has developed such a lot of that everything from our vehicle to our refrigerator needs an association with the web. This brings up different issues like; Will there be sufficient data transmission for every one of these gadgets? Will this information be secure? Will the current system be quick enough for everyone of this information? Will there be an excessive amount of combination on the network traffic?

RFID stands for Radio Frequency Identification. RFID is a widely used technology for storing digital information and share them between objects. The sharing of data in RFID takes place through electromagnetic fields and radio waves.

In this RFID project, we will use RFID to make a lock for your PC. With this lock, you will be saved from the annoying task of typing passwords every time you start your PC. As a matter of fact, RFID is quite a cheap technology to use and is reliable as well.

 Introduction:

Water is an important resource for our planet. We should not waste it and try to regulate its use. There is a constant decrease in water levels in the environment. Currently, water in urban areas comes for a specific period and an individual is needed to present physically to switch on the pumps, store water and then again switch it off once the tank is filled. If a person forgets to switch off the pump on time then a lot of water is wasted and if the person is not available on time to switch on the pump, then they will have to face difficulty due to the unavailability of water. This IoT project focuses on this issue and eliminates the need for a person. It automatically switches on the pump when water comes, and will switch it off once the tank is filled. Many people have installed this in their houses and find it effective.

The highlights of computerized items are developing immensely which triggers the incessant utilization of advanced cells in a few applications. Therefore, the battery reinforcement time is getting diminished. It will be amusing to construct a Power Bank for Mobile Phone as extra charging hotspot for crisis reason which is also likewise compact.

The good times of fossil fuels and other non-renewable energy sources are slowly diminishing. With global warming considered as an emergency by most nations, non-renewable sources are gaining more and more popularity. The solar energy is considered as the best and eco-friendly form of energy. Although solar energy was there for over two decades the importance of this source has increased in recent years. More and more individuals and nations alike are shifting to solar as a reliable source of energy. From solar-powered appliances to auto motives, this source of renewable energy is for sure how the world will be powered in the coming years.

In this project, you will learn how to build a fire fighting drone, which can able to detect and put off the fire both autonomously and manually. Making a final year project on drones will definitely help you to build a nice career. 

In recent years drones gained more popularity because of its wide range of applications and the day to day advancements in their features. Fire fighting is one of the difficult tasks where firefighters risk their lives to save the victims. To make the rescuing process easy and safe, drones are implemented to extinguish the fire.

Design your own Bluetooth controlled RC car. You can do it as a mini project in your academics. In this project, you will learn the types of components used to have input and output, usage of Bluetooth connectivity and interfacing them to other electronic devices like Arduino, raspberry pi.

In today’s universe, especially in India the car parking arrangement is not so well built up. Let’s get an example of the shopping malls of our nation, on peak hours or on weekends there is a vast deficit of parking slots.

Management doesn’t know whether the parking is full or not, and they keep on letting the vehicles in the basement.

Overview

How do we use a fan, we usually turn on the fan manually. But If the control is in your hands the speed control would be easy. Because there is no need to go near switchboard and vary fan speed. Easy process right? Yes, you heard that right! Control in your hands. This mini-project will make that process easy. We use the Bluetooth connectivity to control the speed of fan remotely. We use the combination of microcontroller and Bluetooth connectivity to achieve the purpose to control the speed of the fan.

Imagine you want to display your name on LCD display in front of your door or wherever you want. You want to change it again and again. In this Bluetooth controlled LCD project you will learn to display information on the LCD display and to change it via Bluetooth. We can change it over and over during necessity arises. We are using Bluetooth connectivity for this purpose. So, the command can be given only over the range of area of Bluetooth.

Farmers normally operate on broad portions of the field to develop numerous crop varieties. It's not always easy for a single person to maintain control of the entire agricultural land all the time. Often a certain area of the land may receive more water which may lead to sludge or it may receive very little water that dries the soil. The crops may get affected in any of the situations, and farmers may suffer damage.

The primary aim of Automobile Movement Street Light project is to save energy by turning on the street lights when the system senses the traffic activity by using Arduino Uno. The mechanism turns the street light ahead of the car and also turns off the trailing lights.

The motion of automobiles is sensed through sensors. The mechanism immediately switches on the lights ahead of the identified car, and the following lights are turned off as long as the vehicle passes forward.

A flock of birds can easily bring down a billion-dollar aircraft. You might have read some news like aircraft is halted or crash happened because of a bird strike. In the US alone there were 142,000 bird strikes happened between 1990 and 2013 which killed 24 people and destroyed 64 civilian aeroplanes.

Birds are not only affecting the aviation industry but also other fields like Agriculture, Marine docks, Football grounds, etc.

In this drone project, we will try to figure out a solution to the above-mentioned problems caused by birds. Nowadays drones gained huge popularity because of the following features such as manoeuvrability, easy to control, low manufacturing cost, etc.

Here we are going to implement drones to scare/control the birds by producing ultrasonic sounds (Bird repellant) without making any harm to the birds as well as the environment.

Introduction- The baby pram monitoring system is a monitoring technique by which you can keep an eye over your child when you are physically unavailable by the use of sensors and feedback systems. This system can be used in varied situations like when you are in another room doing your work, in office and your child is with a baby sitter, etc.

Nowadays drones are gaining popularity very fast because of their wide range of applications. In this project, we will see how to develop an agricultural drone and what all things can be done using it.

Due to the depletion of natural resources, all the farmers started implementing Precision agriculture (PA). Precision Agriculture is a technique that uses Information Technology to give the crops and soil what exactly is required which ensures sustainability, profitability and protection to the environment.

We have often seen that Physically challenged are struggling to communicate. The people who can’t able to move and struggling to communicate with others, someone has to look after them. If they ask for water, they have struggled a lot. People who are caring for them face difficulty to understand their requirements and give the things they wanted. For the care of those people, we had a project that will assist their caring. This Arduino project helps those people to say their common requirement for people who care for them. Thus, they can communicate with others. They meet their requirements through these types of communication. 

Remember the situation, when you’ve parked the car or imagine you are parking a car. You need to look into the mirror and then you have to park the car. You may require another person to assist. Parking the car in a position is not a challenging task, but this project makes it better. This project helps to park the car in the parking area at a proper place easier. When the vehicle crosses the parking area, the buzzer makes the sound. This signal indicates the vehicle crossed the parking area. The sound of the buzzer continues until the vehicle is parked in the range of areas selected for parking. When the car is parked in the proper area, the buzzer will stop. Ultrasonic distance sensing technology is used for this process. Thus parking of the vehicle in the parking area is ensured by Ultrasonic Distance Sensing technology. Ultrasonic Distance Sensing technology is used in this project for parking assistance.

Here is a project to sort the coins of the same value. When there is a greater number of coins, sorting becomes a time-consuming process. Coin sorting will make the total value calculation easy. Our project does the coin sorting accurately. It uses IR sensing technology. Mechanical design is used for sorting. This technology makes the process simpler, faster. 

Robots are similar to humans but they are robust and more efficient than human beings. Similar to humans they can also sense the environment and react with the help of sensors. Because of its various applications, it is widely used in fields such as military, space exploration, manufacturing industries, etc.

In this robotics project, you will use Arduino to develop an autonomous robot which can able to detect and avoid the edges with the help of IR sensors.

Printed Circuit Board (PCB) acts as a skeleton for the electronic components placed on it. It is found in almost all electronic devices. It is used to support mechanically and electrically connect electronic components with the help of conductive paths made of copper. All the components such as IC’s, sensors, resistors, capacitors are soldered to the PCB to form a PCB assembly.

In this electronics project, we will fabricate a PCB prototype to power an LED when a sound is produced. When you make a sound the microphone will detect the sound and convert it into an electrical signal. The electrical signal is then processed by the IC and it turns ON the LED.

Persistence of Vision is a kind of optical illusion that happens in our brain. The human brain cannot process more than 10-12 images per second when it exceeds this number of images optical illusion is created. The same principle is used to make animated movies. 

In this electronics project, we are going to fabricate a PoV display using Arduino, motor and LED. We will synchronize the LED flashing with the motor speed to make a Pov display with the help of Arduino programming techniques. 

Espionage robots are not best suited for surveillance on rugged terrain because of its wheeled systems. Due to the inability to operate on rugged terrain, robotics and drones get jammed.

Here the model presents a rugged terrain beetle robot that can quickly move across jungles, hilly and rocky areas with minimal effort. Its compact size helps it to travel across rugged terrain like a little animal with little noise moving through the forest. To perform this function the robot uses a crawling method.

Drones are getting advanced day by day and their usage also increased in various fields. With the help of drones, you can able to accomplish various types of missions by spending less. In this drone project, we will discuss how to build a drone with terrain following mode using the Mission Planner software.

Moving object detection is widely used in fields like aviation, marine, road monitoring for video surveillance and safety purposes. In this Digital signal processing project, we are going to discuss MPEG-4 based moving object detection and tracking system.

MPEG - 4 Moving Picture Experts Group is an organization who is responsible for video encoding standard. When compared to MPEG-1 and MPEG-2, MPEG - 4 encodes the video file in a smaller size which is why it is used widely in online streaming platforms and media file transfer. MPEG 2 is used in DVD’s and it has good video quality compared to MPEG 4.

Crowd control and monitoring is a difficult task for the police forces if the strength of the crowd is huge. Usually, the police will use tear gases to disperse the crowds in uncontrolled situations but during this process, the police might be injured to avoid such situations we can use the drone to control the crowds.

With the advancement in technologies, the usage of drones increased a lot. In this drone project, we will propose a solution to this problem.

The use of Unmanned Aerial Vehicles (UAV) and Unmanned Underwater Vehicles (UUV) in both military and commercial sectors have expanded greatly in recent years. The advancement in technologies paved a way for developing a single vehicle which is capable of working on both Air and underwater environment.

In this drone project, you are going to develop a fixed-wing drone that can able to fly like an aircraft and swim like a fish.

Drones are becoming more popular than ever due to their unimaginable applications and fascinating modifications. Along with their applications, the manufacturing cost of the drones also will increase. To overcome the above problem in this project idea, we are going to propose a solution. The best way to reduce the cost is by reducing the components used.

Modular drones are aerial vehicles which can be modified on the go. A single drone can be modified and used for various purposes. For example, you want the drone to capture high-quality videos - use an HD camera mod or you want to use the drone to convey information - fix the speaker mod or you want the drone to display something - attach the screen mod.

As we are advancing in technology it is necessary to find a newer method of energy generation with minimal damage to the environment. The wind is renewable source energy which will not pollute the environment. The energy generated from the wind almost fulfils the energy requirement of most of the households. But wind turbines have drawbacks like high implementation cost and difficulty in the transportation of components.

Airborne wind energy generation is the only solution to solve the problem. Here the turbine is placed airborne and the power generated is transmitted to the ground with the help of power cables. This saves a lot of cost in the implementation and transportation compared to the conventional wind turbine system.

In this aeronautical project, we are going to develop an airborne wind energy system using lighter than air aircraft.

Generating power from winds is the purest form of energy generation method when compared to other energy generation methods like thermal powerplant, nuclear power plant, etc. It also doesn’t affect the atmosphere by releasing harmful gases like Carbon dioxide or Carbon monoxide. But for generating electricity from the wind needs a huge setup such as blades, pillars, generators, etc. It also requires a lot of maintenance after the implementation. The cost of setting up the wind turbine is also very high.

In this aeronautical project idea, we will propose an innovative solution to generate electricity from the wind. We are going to develop an Airborne wind energy system to replace the traditional windmills.

Drones are the major innovation of this century which is widely used for various applications. They already proved their ability in various fields. Here we are going to use tethered drones to generate power from the wind. Here the drones are launched in the air and positioned at an altitude of 600-1000 feet. At this altitude, the turbulence of the wind will be less compared to the altitude where the conventional wind turbine is positioned.

Nowadays, accidents in highways are increased due to the increase in the number of vehicles. To avoid collisions between vehicles the speed of the vehicle is reduced or the driver is alerted when it nears the preceding vehicle. In this VLSI design project, we will design a PID controller based on fuzzy logic using Very Highspeed Integration Circuit Hardware language for automobile’s cruising system. 

Nowadays, robots are used for various applications. From home to big industries robots are implemented to perform repetitive and difficult jobs. Robots are preferred over human workers because robots are machines which can able to work 24x7 without getting tired. Because of its wide range of applications some industries use multiple robots in the same place. In such a case, there might be a chance of collision between robots. To solve this problem we are going to propose a solution using RFID tags.

In this VLSI design project, we are going to develop an anti-collision robot processor which is combined with a smart algorithm to avoid crashes with other robots and physical objects using RFID. The algorithm is implemented in VHDL (VHSIC - HDL Very Highspeed Integrated Circuit - Hardware Description Language) and simulated using Xilinx simulation software.

Error Correction Codes (ECCs) recommends a delayed penalty in pervading the data as encoding or decoding has to be executed. ECCs are extensively used to conserve memory and to bypass data corruption. Due to hindering the use of ECCs in high-speed memories, it led to the use of Single Error Correction Double Error Detection (SECDED) codes. 

Multiple Cell Upsets (MCUs) becomes more familiar and restrict the use of SEC-DED codes unless they are joined with interleaving as technology scaled up. The biggest issue in memories is arising the errors which can be explained i.e. by radiation-induced soft errors that alter one or more memory cells, shift their values and other deficiencies cause permanent damage. 

ABSTRACT

In newly manufactured cars a lot of effort is put on reducing the background noise so that the person in the front seat can hear the voice from the rear seat. The main intension of this DSP project is to increase the audibility between the driver and the rear seat persons. This system is implemented in DSP –system in a test car, a microphone is placed in front of the driver to collect the speech and this microphone filters and remove the main part of the background noise. And loudspeakers are placed in the rear for the passenger to listen from the driver, there is a delay in sound of the driver to reach the passenger which makes the right voice of the driver. This evaluated system shows that there is increased audibility along with the no change in background noise.

Drones or Unmanned Aerial vehicles are used widely to do various things in fields like logistics, rescue, surveillance, inspection, and many more. More innovations are happening in the structure of the aerial vehicles to reduce the size of the aerial robot to make it more agile. Multirotors are more stable than fixed-wing but the size of the drone and the rotor positioning make it inaccessible in small areas.

In this drone project, we will try to implement biomimicry design in aerial robots to solve the structural issue in accessing small areas. Aerial transformation is one way to solve the problem. Here we are going to implement a biomimicry design similar to snake with the help of multi-link structure. This provides the ability of multi-degree of freedom aerial transformation. 

Latest Projects based on electronic