3D Printed DNA extractor

About the project

Biotechnology is powerful, but only for those with the tools to experiment with and utilize it. Biotechnology combined with 3d printing can be make wonders and leads to bioprinting, tissue engineering, centrifuge dna extractor.

Looking to build project on 3D Printer?:

Skyfi Labs gives you the easiest way to learn and build this project.

1. 3D Printer Kit will be shipped to you (anywhere in the world!)
2. Use high quality videos to understand concepts and build the project
3. Get 1 to 1 expert assistance from Skyfi Labs engineers while doing the project
4. Earn a smart certificate on finishing the project

You can start for free and pay only if you like it!

Start for free

Centrifuges are large machines with precise controls for RPMs, G-force, timers of all kinds, and even ones with temperature control and as per this project, mini centrifuge is used.

Use a 3d printer to build the frame or parts. Use STL files to upload and print the required components. Use arduino to control the actions of the 3d printer.

Assemble the centrifuge by attaching the drone motor to the motor mount piece with its bolts.Feed the motor’s 3 wires through the case cover and then connect to the ESC.

Install the female adapter & rocker. Attach the wired-up potentiometer to the case cover, and then fit it into place.

ESC interprets to do all the programmed tasks. Too much power, or fluctuations in power, can cause the motor to stop working and the ESC to reset.

When you turn on your centrifuge using the rocker switch, the ESC will beep, then calibrate itself. Slowly turn the knob until it reaches halfway and begins spinning. Turn it the rest of the way to get it to spin faster.

Then spin the rotor at 1–2 minute intervals. We use a phone app stopwatch to time it. Always operate it with the lid down. Be sure to always balance the rotor. If you’re using only one test tube, make sure to place another opposite it, even if it is empty.

The rotor must always be balanced or you risk subjecting it to uneven and possibly destructive forces. Pass the signal and operate the centrfuge to check the working of the set up as well as the installed electronics.

Did you know

Skyfi Labs helps students learn practical skills by building real-world projects.

You can enrol with friends and receive kits at your doorstep

You can learn from experts, build working projects, showcase skills to the world and grab the best jobs.
Get started today!

• 3D Printing
• Centrifuge
• ESC
• Rotor

• 3D Printing
• Bio Technology
• Electronic

3D Printed DNA extractor