Diaphram Pump

A diaphragm pump also known as a Membrane pump is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or Teflon diaphragm and suitable valves on either side of the diaphragm to pump a fluid. There are three main types of diaphragm pumps.

Looking to build projects on Mechanical?:

Mechanical Kit will be shipped to you and you can learn and build using tutorials. You can start for free today!

1. 3D Printer

2. Automobile Prototyping

3. CNC Machine using Arduino

4. Project Management with Primavera

One in which the diaphragm is sealed with one side in the fluid to be pumped, and the other in the air or hydraulic fluid. The diaphragm is flexed, causing the volume of the pump chamber to increase and decrease. A pair of non-return check valves prevent reverse flow of the fluid.

Two employing volumetric positive displacement where the prime mover of the diaphragm is electro-mechanical, working through a crank or geared motor drive, or purely mechanical, such as with a lever or handle. This method flexes the diaphragm through simple mechanical action, and one side of the diaphragm is open to air.

Three employing one or more unsealed diaphragms with the fluid to be pumped on both sides. The diaphragm(s) again are flexed, causing the volume to change.

Did you know

Skyfi Labs helps students learn practical skills by building real-world projects.

You can enrol with friends and receive kits at your doorstep

You can learn from experts, build working projects, showcase skills to the world and grab the best jobs.
Get started today!

When the volume of a chamber of either type of pump is increased (the diaphragm moving up), the pressure decreases, and fluid is drawn into the chamber. When the chamber pressure later increases from decreased volume (the diaphragm moving down), the fluid previously drawn in is forced out.

The diaphragm moving up once again draws fluid into the chamber, completing the cycle. This action is similar to that of the cylinder in an internal combustion engine. Diaphragm Pumps deliver a hermetic seal between the drive mechanism and the compression chamber, allowing the pump to transfer, compress, and evacuate the medium without a lubricant.

An elastomeric diaphragm can be used as a versatile dynamic seal that removes many of the limitations found with other sealing methods. They do not leak, offer little friction, and can be constructed for low-pressure sensitivity. With the right material consideration, diaphragms can seal over a wide range of pressures and temperatures without needing lubrication or maintenance.

Diaphragm pump has good suction lift characteristics, some are low-pressure pumps with low flow rates; others are capable of higher flow rates, dependent on the effective working diameter of the diaphragm and its stroke length. They can handle sludges and slurries with a relatively high amount of grit and solid content.

Diaphragm pump are suitable for discharge pressure up to 1,200 bar, have good dry running characteristics, used to make artificial hearts, make air pumps for the filters on small fish tanks,97% efficient.

• Diaphram Pump
• Pipes
• Water
• Electric
• Motor

• Pump
• Pressure
• Water

Diaphram Pump